Home

>

Building Materials

>

Roofing Products

>

Bituminous Roofing Rolls, Felt & Related Products

Firestone W56RAC4230  Heavy Duty  Fasteners 1-1/4 inch – pail of 1000

Firestone W56RAC4230 Heavy Duty Fasteners 1-1/4 inch – pail of 1000

Tax Included

Item Nr: 100043558

Naf

{{productPrice | integer}}.

{{productPrice | decimal}}

ea

Firestone W56RAC4230 Heavy Duty Fasteners 1-1/4 inch – pail of 1000

check_circle

In stock at Zeelandia

check_circle

In stock at Jan Noorduynweg

cancel

Not available at Sta. Rosaweg

Brand

Firestone

Firestone

Product description

The Firestone Heavy Duty Fastener is specifically designed to be used in roofing applications which require additional corrosion protection and additional pullout resistance. The Heavy Duty Fastener may be used for attachment of roofing insulation and base sheets in combination with Firestone Insulation Plates, or for attachment of Firestone Batten Strips, Seam Plates, Termination Bars, and other accessories to steel, wood, concrete and other decks where approved by Firestone Technical Specifications.

Details

  • Material: SAE 1022, Heat Treated Steel
  • Threads per in.: 13 min.
  • Thread design: Buttress thread
  • Fastener tip: Drill point design
  • Fastener head: #3 Phillips drive
  • Packaging: 1,000 pieces per plastic pail
  • See more

    See less

Features

  • Specifically designed to be used in roofing applications which require additional corrosion protection and additional pullout resistance
  • Using the #3 Phillips tip provided, and a variable speed drill, engage the fastener into the deck as noted below. Take care not to over or under drive the fastener. Threads must engage the decking material per Firestone Technical Specifications
  • Determine screw length as follows: a. Steel Decks: Select fastener length to penetrate through the deck a minimum of ¾ inch (19.1 mm). b. Wood Decks: Select fastener length to penetrate into or through the deck a minimum of 1 inch (25.4 mm). c. Concrete D
  • If pre-drilling of the deck substrate is necessary, use a hammer drill in impact mode with a 7/32 inch (5.6 mm) carbide drill bit. Install fasteners by using a variable speed drill at a maximum of 1,500 rpm

Add to cart

© 2021 Kooyman B.V.